Filter By
Products
Page 1 of 2
-
AM
Medium Grade Automotive Refinishing Tape
American® brand AquaMask (AM) is a cost-effective solution designed to perform in many automotive refinishing applications. The rubber-based adhesive provides secure adhesion to both painted and bare metals and plastics, yet removes cleanly without adhesive residue, paint “flaking” from backside or surface staining.
View Product -
BD23
Crepe Paper Tape
A medium strength, smooth crepe paper, pressure-sensitive tape having excellent tear strength and conformability to irregular surfaces. BD23's stain free adhesive is formulated to provide resistance to elevated temperatures (up to 300°F). Time of exposure and temperatures will vary depending on surfaces and application conditions.
View Product -
FM35
View Product -
FM71
Medium Temp Fine Line Specialty Masking Tape
FM71 “fine line” masking tape uses thermally stabilized PVC backing with a rubber-based, pressure-sensitive adhesive. This tape is designed to offer a high degree of conformability without excessive stretch. Will hold and cleanly remove from surfaces in the presence of 250° F (120° C) temperatures for at least 30 minutes....
View Product -
HMF
Hand Masking Film
Hand Masking Film is a pre-folded high density polyethylene masking film. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications.
View Product -
OM
High Temp Premium Grade Paper Masking Tape
OM (Orange Mask®) is an orange, high quality, smooth, crepe paper masking tape with a natural rubber adhesive. Good quick-stick and holding properties for the composites industries. Smooth-to-the-touch, straight, clean paint-break line, highly conformable and flexible, tear resistant, moisture and solvent resistant, UV resistant up to 72 hours, and can...
View Product -
PG16
High Temp Medium Grade Paper Masking Tape
A beige, smooth, crepe masking tape with a pressure-sensitive, natural rubber adhesive. Good quick stick and holding properties. Typical temperature ranges from room temperature to 325°F (160°C) for 20 to 40 minutes.
View Product -
PG21
High Temp Premium Paper Masking Tape
A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive rubber/resin adhesive. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325?F (163°C) for 30 minutes (time and temperature determined by surface). Performs well in wet strip applications. Its easy handling,...
View Product -
PG21A
High Temp Premium Paper Masking Tape
A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive natural rubber adhesive. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (times and temperatures determined by surface). Performs well in wet strip applications. Its easy...
View Product -
PG5
Medium Grade Paper Masking Tape
Recognized as the premium painter’s tape. Offers an excellent balance of quick stick, panel adhesion and holding properties. Recommended for most paint masking applications where excellent cornering with clean removal is desired. Will support masking paper aprons at 160°F (70°C) for 30 minutes. ASTM-D6123/D6123M (1), CID AA-883B (1)
View Product -
PG505
Utility Paper Masking Tape
A paint contractor industry staple. Crepe paper masking tape coated with a pressure-sensitive natural rubber adhesive. Offers an excellent balance of quick stick, panel adhesion and holding properties. Not recommended for outdoor exposure.
View Product -
PG57R
Medium Temp Premium Paper Masking Tape
A pressure-sensitive masking tape designed primarily for the aircraft industry where resistance to strong solvent / high solids and polyurethane-based paints is a necessity. Adhesive is specially formulated to provide excellent adhesion-to, and transfer-free removal from, a variety of prepared aluminum surfaces. PG57R product is able to support large kraft...
View Product